NEWS
- Drug transport across nylon 610 films: influence of synthesi
- Spherulites in nylon 610 and nylon 66
- Special material for fishing line production - nylon PA612 drawing grade product
- Extrusion grade nylon PA12 raw material for tennis racket sheath
- High toughness, high impact strength and high abrasion resistance resin PA612 is used to make brushe
- Nylon 612 has good abrasion resistance and is used to make hoses
- PA610 is used to make high impact strength and high toughness bushings
NEWS>>
PA610 is used to make high impact strength and high toughness bushings
TIME：2020-06-27 12:50:01
PA610 is used to make high impact strength and high toughness bushings.
PA610 is used to make corrosion-resistant valves, insulating devices, etc. in the chemical industry;
PA610 is used to make precision electrical connectors, high-strength shells, high-temperature contactors, etc. in the electrical and electronic industry;
PA610 is used in the electrical industry to make motor parts, terminals and switches that are used in harsh environments;
PA610 is used in the production of high temperature resistant, high dimensional bushings and piston rings in the machinery industry.
PA610 Resin PA612 Resin PA1010 Resin PA1212 Resin WECHAT：18602297376
PA610 is used to make precision electrical connectors, high-strength shells, high-temperature contactors, etc. in the electrical and electronic industry;
PA610 is used in the electrical industry to make motor parts, terminals and switches that are used in harsh environments;
PA610 is used in the production of high temperature resistant, high dimensional bushings and piston rings in the machinery industry.
| NO. | ITEM | TEST METHODS | TEST CONDITION | UNIT | Typical value | ||
| CL6514-5 | |||||||
| Physical Propertids | |||||||
| 1 | Density | GB/T1033 | 23ºC | -- | 1.08 | ||
| ISO1183 | |||||||
| 2 | Molding shrinkage | GB/T 15585 | ‐ | % | 1.2 | ||
| 3 | Shore hardness | GB/T2411 | ‐ | D | 84 | ||
| ISO2039 | |||||||
| 4 | Melting point | GB/T 4608 | ‐ | ºC | 215 | ||
| ISO3146 | |||||||
| Mechanical Propertie | |||||||
| 5 | Tensile strength | GB/T 1040 | 50mm/min | - | ≥59 | ||
| ISO527 | |||||||
| 6 | Flexural strength | GB 9341 | 2mm/min | Mpa | ≥80 | ||
| ISO178 | |||||||
| 7 | Flexural Module | GB /T9341 | 2mm/min | Mpa | 2100 | ||
| ISO178 | |||||||
| Remark | |||||||
PA610 Resin PA612 Resin PA1010 Resin PA1212 Resin WECHAT：18602297376
Office: No.B11 Wealth Plaza,Weijin Road,Heping District,Tianjin,China. Zip code: 300070
E-mail：sales@lyuechem.com Tel: +0086-22-23447568 Mob: +0086-18602297376
天津谷骐科技有限公司 Copy right © 2010-2024
Technical Support : Lyuechem
津公网安备 12010102000573号
Scan to add WeChat